pycoproc.py and Expansion board 3
The Expansion Board 3 (alone) requires 3.8mA (--> read on the multimeter) and I have read that it depends on the PIC on the Exp. Board that remains active even if the Lopy4 (that I use) is in machine.deepsleep.
I have also read that the pycoproc.py library can be used in order to put in power down the PIC.
1: is it right?
2:can anyone help me and give an example on how to do it? (for expansion board 3 and not for Pysense or pytrack).
Thanks a lot for your help